• Cast Iron ODP NEMA Premium

    • Three Phase, 60 Hz, 1.15 Service Factor (Continuous); 50 Hz, 1.0 Service Factor (Continuous)
    • Class F Insulation
    • Class B Temperature Rise
    • NEMA Design B Torques
    • Cast Iron Frame and End Brackets
    • Rolled Steel Main Conduit Box
    • Grounding Terminal Inside Main Conduit Box
    • Oversized Main Conduit Box Rotatable in 90 Degree Increments – F1 Mounted
    • Designed for 40˚C Ambient Temperature
    • Designed for 3300 ft. Elevation
    • Bi-Directional Rotation
    • 1045 Carbon Steel Shaft
    • Aluminum Die Cast Squirrel Cage Rotor Construction
    • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
    • Paint Color: Light Gray – Munsell N5.0
    • Double Shielded Bearings Pre-Packed with MULTEMP SRL for F# 140T – 280T (Non-regreasable)
    • High Quality Ball (or Roller) Bearings regreasable with Mobil Polyrex™ EM for F# 280TS and Larger
    • Labyrinth Type Metal Flinger on Both Ends for F# 280TS and Larger
    • Cast Iron Inner and Outer Bearing Caps for F#280TS and Larger
    • Stainless Steel Nameplate
    • New Dual Column Design Nameplate as Standard (60/50 Hz)
    • Suitable for Inverter Use per NEMA MG-1.4.4.2, Part 31
    • Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque
    • 9 Leads for 5 HP and Smaller;
    • 12 Leads for 7.5 HP to 125 HP;
    • 6 Leads for 150 HP and Larger
    • Motors are U.L. Recognized, CSA Approved and CE Marked
  • Hot

    Oil Well Pump

    • Three Phase, 60 Hz, 1.15 Service Factor (Continuous); 50 Hz, 1.0 Service Factor (Continuous)
    • Class F Insulation
    • Class B Temperature Rise
    • NEMA Design B Torques
    • Cast Iron Frame and End Brackets
    • Rolled Steel Main Conduit Box
    • Grounding Terminal Inside Main Conduit Box
    • Oversized Main Conduit Box Rotatable in 90 Degree Increments – F1 Mounted
    • Designed for 40˚C Ambient Temperature
    • Designed for 3300 ft. Elevation
    • Bi-Directional Rotation
    • 1045 Carbon Steel Shaft
    • Aluminum Die Cast Squirrel Cage Rotor Construction
    • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
    • Paint Color: Light Gray – Munsell N5.0
    • Double Shielded Bearings Pre-Packed with MULTEMP SRL for F# 140T – 280T (Non-regreasable)
    • High Quality Ball (or Roller) Bearings regreasable with Mobil Polyrex™ EM for F# 280TS and Larger
    • Labyrinth Type Metal Flinger on Both Ends for F# 280TS and Larger
    • Cast Iron Inner and Outer Bearing Caps for F#280TS and Larger
    • Stainless Steel Nameplate
    • New Dual Column Design Nameplate as Standard (60/50 Hz)
    • Suitable for Inverter Use per NEMA MG-1.4.4.2, Part 31
    • Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque
    • 9 Leads for 5 HP and Smaller;
    • 12 Leads for 7.5 HP to 125 HP;
    • 6 Leads for 150 HP and Larger
    • Motors are U.L. Recognized, CSA Approved and CE Marked
  • Rolled Steel JP/JM NEMA Premium

    • Three Phase, 60 Hz, 1.15 Service Factor (Continuous); 50 Hz, 1.0 Service Factor (Continuous)
    • Class F Insulation
    • Class B Temperature Rise
    • NEMA Design B Torques
    • Cast Iron Frame and End Brackets
    • Rolled Steel Main Conduit Box
    • Grounding Terminal Inside Main Conduit Box
    • Oversized Main Conduit Box Rotatable in 90 Degree Increments – F1 Mounted
    • Designed for 40˚C Ambient Temperature
    • Designed for 3300 ft. Elevation
    • Bi-Directional Rotation
    • 1045 Carbon Steel Shaft
    • Aluminum Die Cast Squirrel Cage Rotor Construction
    • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
    • Paint Color: Light Gray – Munsell N5.0
    • Double Shielded Bearings Pre-Packed with MULTEMP SRL for F# 140T – 280T (Non-regreasable)
    • High Quality Ball (or Roller) Bearings regreasable with Mobil Polyrex™ EM for F# 280TS and Larger
    • Labyrinth Type Metal Flinger on Both Ends for F# 280TS and Larger
    • Cast Iron Inner and Outer Bearing Caps for F#280TS and Larger
    • Stainless Steel Nameplate
    • New Dual Column Design Nameplate as Standard (60/50 Hz)
    • Suitable for Inverter Use per NEMA MG-1.4.4.2, Part 31
    • Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque
    • 9 Leads for 5 HP and Smaller;
    • 12 Leads for 7.5 HP to 125 HP;
    • 6 Leads for 150 HP and Larger
    • Motors are U.L. Recognized, CSA Approved and CE Marked
  • Rolled Steel ODP JP/JM EPAct

    • Three Phase, 60 Hz, 1.15 Service Factor (Continuous); 50 Hz, 1.0 Service Factor (Continuous)
    • Class F Insulation
    • Class B Temperature Rise
    • NEMA Design B Torques
    • Cast Iron Frame and End Brackets
    • Rolled Steel Main Conduit Box
    • Grounding Terminal Inside Main Conduit Box
    • Oversized Main Conduit Box Rotatable in 90 Degree Increments – F1 Mounted
    • Designed for 40˚C Ambient Temperature
    • Designed for 3300 ft. Elevation
    • Bi-Directional Rotation
    • 1045 Carbon Steel Shaft
    • Aluminum Die Cast Squirrel Cage Rotor Construction
    • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
    • Paint Color: Light Gray – Munsell N5.0
    • Double Shielded Bearings Pre-Packed with MULTEMP SRL for F# 140T – 280T (Non-regreasable)
    • High Quality Ball (or Roller) Bearings regreasable with Mobil Polyrex™ EM for F# 280TS and Larger
    • Labyrinth Type Metal Flinger on Both Ends for F# 280TS and Larger
    • Cast Iron Inner and Outer Bearing Caps for F#280TS and Larger
    • Stainless Steel Nameplate
    • New Dual Column Design Nameplate as Standard (60/50 Hz)
    • Suitable for Inverter Use per NEMA MG-1.4.4.2, Part 31
    • Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque
    • 9 Leads for 5 HP and Smaller;
    • 12 Leads for 7.5 HP to 125 HP;
    • 6 Leads for 150 HP and Larger
    • Motors are U.L. Recognized, CSA Approved and CE Marked
  • TEFC Low Voltage High Thrust with “P” Base

    • Three Phase, 60 Hz, 1.15 Service Factor (Continuous); 50 Hz, 1.0 Service Factor (Continuous)
    • Class F Insulation
    • Class B Temperature Rise
    • NEMA Design B Torques
    • Cast Iron Frame and End Brackets
    • Rolled Steel Main Conduit Box
    • Grounding Terminal Inside Main Conduit Box
    • Oversized Main Conduit Box Rotatable in 90 Degree Increments – F1 Mounted
    • Designed for 40˚C Ambient Temperature
    • Designed for 3300 ft. Elevation
    • Bi-Directional Rotation
    • 1045 Carbon Steel Shaft
    • Aluminum Die Cast Squirrel Cage Rotor Construction
    • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
    • Paint Color: Light Gray – Munsell N5.0
    • Double Shielded Bearings Pre-Packed with MULTEMP SRL for F# 140T – 280T (Non-regreasable)
    • High Quality Ball (or Roller) Bearings regreasable with Mobil Polyrex™ EM for F# 280TS and Larger
    • Labyrinth Type Metal Flinger on Both Ends for F# 280TS and Larger
    • Cast Iron Inner and Outer Bearing Caps for F#280TS and Larger
    • Stainless Steel Nameplate
    • New Dual Column Design Nameplate as Standard (60/50 Hz)
    • Suitable for Inverter Use per NEMA MG-1.4.4.2, Part 31
    • Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque
    • 9 Leads for 5 HP and Smaller;
    • 12 Leads for 7.5 HP to 125 HP;
    • 6 Leads for 150 HP and Larger
    • Motors are U.L. Recognized, CSA Approved and CE Marked